Siemens Tia Portal S7 1200 Plc Basic

Tags: Siemens TIA Portal

with real hardware ( s7 1214 dc/dc/dc , buttons , laser sensor , com. module )

Last updated 2022-01-10 | 3.8

- **You can request a coupon code for a discount
- Using Siemens Tia Portal Software
- S7 1200 PLC Programming

What you'll learn

**You can request a coupon code for a discount

Using Siemens Tia Portal Software

S7 1200 PLC Programming

S7 1200 PLC Hardware

S7 1200 PLC Basic instructions

S7 1200 PLC Timer

S7 1200 PLC Counter

S7 1200 PLC Data Type

S7 1200 PLC Analog Input

* Requirements

* TIA PORTAL Software
* S7 1200 CPU

Description

Learning Tia Portal With S7 1200 PLC;

This one is a basic course. I've already made 29 hours video about TIA Portal automation systems in Turkish. More lessons in English are coming up.

We will use real hardware during our lessons. And we will

demonstrate how cable, pin etc. connection should be done.

The hardwares we use at our basic course are: Siemens s7 1214 dc/dc/dc CPU, communations module, buttons(no/nc), laser sensor.

You will learn how to add harware and how to use basic instructions, timers, counter, compare, analog input signals, show value in hmi.

Who this course is for:

student
engineer
technician

Course content

1 sections • 18 lectures

Buradan başlayın 18 lectures

Tia Portal Software Information Preview 10:43

Our goal is to learn information about Tia Portal software and hardware. Our cpu is S7 1214 DC/DC/DC. At first, we will learn how to add device. I am not going to be boring. So we will get to study quickly.

Add New Device and module Preview 10:14

If we want create program.We must configure our hardware.Because of this we will add our cpu and module in our software.

Hardware Downloading Preview 10:28

Our cpu need know which one module and signal board we have.We must download our hardware feature to cpu.After we will be go online cpu and check everything is right.

Creating First Network Preview 14:10

Okey...We know something about software and hardware.Why we don't create program?

Let's start creating first network.We will use NO contact and coil.

Basic Instructions Preview 14:09

We are very powerfull.Then start to learn diffrent command...NC / SET / RESET

Important Programming Rule Preview 09:27

We must know some rule for creating right program.I will tell you first important rule.Please watch this video two times..

SetBF/ResetBF and Positive/Negative signal edge Preview 09:07

Our new commands are SetBF/ResetBF and Positive/Negative signal edge

Set-reset / Reset - Set Flip Flop Preview 10:42

We will learn set-reset and reset-set flip flop command.

Timers TON/TOF/TP/TONR Preview 16:45

The machine systems some part are work by time.Because of this we must know timer command.The S7 1200 CPU have 4 diffrent timer command.TP/TON/TOF/TONR

Counter And Compare Commands Preview 09:59

If you need count something and compare ; our cpu has some command for this operation.The CTU command is counting in signal and we can use this value for operating our systems.